BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS735

  • Size9x17"
  • PCD5x114.3
  • OffsetET39

BBS RS735 is a part number from the RS II range, which kept the mesh look of the RS on a two-piece construction. It measures 9x17 inches.

The 5x114.3 bolt pattern of the BBS RS735 is the one used by many Japanese and Korean cars.

At ET39 the BBS RS735 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 225-275 mm are the usual match for a 9-inch rim.

Before fitting a 17-inch BBS RS735, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

Note on record: stern.

No centre bore or fitment figure is recorded for the BBS RS735. Read the markings on the back of the wheel before relying on it.

More on where the BBS RS735 came from and how it is built is on the BBS RSII page.

Specifications

BBS RS735 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS7355x114.317939————stern

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models