
BBS RSII series
BBS RS736
- Size9x17"
- PCD5x114.3
- OffsetET39
BBS RS736 is a part number from the RS II range, which kept the mesh look of the RS on a two-piece construction. Size is 9J x 17.
On the BBS RS736, the 5x114.3 PCD is the one used by many Japanese and Korean cars.
At ET39 the BBS RS736 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 225-275 mm are the usual match for a 9-inch rim.
At 17 inches, the BBS RS736 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
Note on record: stern.
No centre bore or fitment figure is recorded for the BBS RS736. Read the markings on the back of the wheel before relying on it.
For the history behind the BBS RS736, how to spot a genuine wheel and what to check when buying used, see the BBS RSII series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS736 | 5x114.3 | 17 | 9 | 39 | — | — | — | — | stern |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit