
BBS RSII series
BBS RS740
- Size8x17"
- PCD5x120
- OffsetET20
The BBS RS740 belongs to the RS II family of two-piece mesh wheels. Size is 8J x 17 and is listed for BMW.
The 5x120 bolt pattern of the BBS RS740 is the one used by BMW and some Land Rover and Honda.
An offset of ET20 puts the BBS RS740 in the usual range for European saloons of its era. An 8-inch rim normally takes tyres from about 205 to 245 mm wide.
At 17 inches, the BBS RS740 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
Note on record: 42 style BMW.
The centre bore of the BBS RS740 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.
The BBS RSII overview covers the background of the BBS RS740 and its siblings, their construction and buying tips.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS740 | 5x120 | 17 | 8 | 20 | — | — | — | BMW | 42 style BMW |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit