BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS741

  • Size9x17"
  • PCD5x120
  • OffsetET26

This page covers the BBS RS741, one wheel from the RS II family of two-piece mesh wheels. It measures 9x17 inches and is listed for BMW.

The 5x120 bolt pattern of the BBS RS741 is the one used by BMW and some Land Rover and Honda.

An offset of ET26 puts the BBS RS741 in the usual range for European saloons of its era. Tyre widths of roughly 225-275 mm are the usual match for a 9-inch rim.

Before fitting a 17-inch BBS RS741, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

Note on record: 42 style BMW.

The centre bore of the BBS RS741 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

For the history behind the BBS RS741, how to spot a genuine wheel and what to check when buying used, see the BBS RSII series guide.

Specifications

BBS RS741 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS7415x12017926———BMW42 style BMW

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models