BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS742

  • Size8x18"
  • PCD5x120
  • OffsetET20
  • Centre bore72.5 mm

BBS RS742 is a part number from the RS II range, which kept the mesh look of the RS on a two-piece construction. It is an 18-inch wheel, 8 inches wide and is listed for BMW e38.

On the BBS RS742, the 5x120 PCD is the one used by BMW and some Land Rover and Honda; the 72.5 mm centre bore matches BMW hubs.

The BBS RS742 uses ET20, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. An 8-inch rim normally takes tyres from about 205 to 245 mm wide.

At 18 inches, the BBS RS742 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

Note on record: 42 style BMW.

More on where the BBS RS742 came from and how it is built is on the BBS RSII page.

Specifications

BBS RS742 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS7425x1201882072.5——BMW e3842 style BMW

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models