
BBS RSII series
BBS RS752
- Size9x17"
- PCD5x114.3
- OffsetET37
BBS RS752 is a part number from the RS II range, which kept the mesh look of the RS on a two-piece construction. It is a 17-inch wheel, 9 inches wide.
The 5x114.3 bolt pattern of the BBS RS752 is the one used by many Japanese and Korean cars.
At ET37 the BBS RS752 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. A 9-inch rim normally takes tyres from about 225 to 275 mm wide.
At 17 inches, the BBS RS752 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
The centre bore and fitment of the BBS RS752 are not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.
The BBS RSII overview covers the background of the BBS RS752 and its siblings, their construction and buying tips.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS752 | 5x114.3 | 17 | 9 | 37 | — | — | — | — | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit