BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS753

  • Size7x17"
  • PCD5x100
  • OffsetET50
  • Centre bore56 mm

This page covers the BBS RS753, one wheel from the RS II family of two-piece mesh wheels. Size is 7J x 17.

The 5x100 bolt pattern of the BBS RS753 is the one used by VW Group, Subaru and Toyota; the 56 mm centre bore decides whether you need hub-centric rings.

ET50 is a high offset for the BBS RS753, so it tucks well inside the arch, as front-drive and most modern cars need. A 7-inch rim normally takes tyres from about 175 to 225 mm wide.

Before fitting a 17-inch BBS RS753, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

No fitment figure is recorded for the BBS RS753. Read the markings on the back of the wheel before relying on it.

For the history behind the BBS RS753, how to spot a genuine wheel and what to check when buying used, see the BBS RSII series guide.

Specifications

BBS RS753 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS7535x1001775056————

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models