BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS769

  • Size8x17"
  • PCD5x100
  • OffsetET35
  • Centre bore57 mm

This page covers the BBS RS769, one wheel from the RS II family of two-piece mesh wheels. It is a 17-inch wheel, 8 inches wide and is listed for vag.

On the BBS RS769, the 5x100 PCD is the one used by VW Group, Subaru and Toyota; the 57 mm centre bore decides whether you need hub-centric rings.

ET35 is a high offset for the BBS RS769, so it tucks well inside the arch, as front-drive and most modern cars need. An 8-inch rim normally takes tyres from about 205 to 245 mm wide.

At 17 inches, the BBS RS769 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

For the history behind the BBS RS769, how to spot a genuine wheel and what to check when buying used, see the BBS RSII series guide.

Specifications

BBS RS769 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS7695x1001783557——vag—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models