
BBS RSII series
BBS RS770
- Size8x17"
- PCD5x98
- OffsetET25
The BBS RS770 belongs to the RS II range, which kept the mesh look of the RS on a two-piece construction. It measures 8x17 inches.
The 5x98 bolt pattern of the BBS RS770 is the one used by Fiat and Alfa Romeo.
An offset of ET25 puts the BBS RS770 in the usual range for European saloons of its era. Tyre widths of roughly 205-245 mm are the usual match for an 8-inch rim.
At 17 inches, the BBS RS770 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
The centre bore and fitment of the BBS RS770 are not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.
The BBS RSII overview covers the background of the BBS RS770 and its siblings, their construction and buying tips.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS770 | 5x98 | 17 | 8 | 25 | — | — | — | — | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit