BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS771

  • Size6.5x16"
  • PCD5x100
  • OffsetET42
  • Centre bore57 mm

This page covers the BBS RS771, one wheel from the RS II range, which kept the mesh look of the RS on a two-piece construction. It is a 16-inch wheel, 6.5 inches wide and is listed for vag.

On the BBS RS771, the 5x100 PCD is the one used by VW Group, Subaru and Toyota; the 57 mm centre bore decides whether you need hub-centric rings.

At ET42 the BBS RS771 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. A 6.5-inch rim normally takes tyres from about 165 to 215 mm wide.

Before fitting a 16-inch BBS RS771, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

More on where the BBS RS771 came from and how it is built is on the BBS RSII page.

Specifications

BBS RS771 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS7715x100166.54257——vag—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models