
BBS RSII series
BBS RS772
- Size6x15"
- PCD4x100
- OffsetET45
- Centre bore57 mm
BBS RS772 is a part number from the RS II range, which kept the mesh look of the RS on a two-piece construction. It is a 15-inch wheel, 6 inches wide and is listed for vag.
On the BBS RS772, the 4x100 PCD is the one used by older BMW, VW, Honda and Mazda; the 57 mm centre bore decides whether you need hub-centric rings.
At ET45 the BBS RS772 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 155-195 mm are the usual match for a 6-inch rim.
At 15 inches, the BBS RS772 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
The BBS RSII overview covers the background of the BBS RS772 and its siblings, their construction and buying tips.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS772 | 4x100 | 15 | 6 | 45 | 57 | — | — | vag | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit