
BBS RSII series
BBS RS774
- Size9x18"
- PCD5x130
- OffsetET52
This page covers the BBS RS774, one wheel from the RS II, the two-piece successor to the original RS. It measures 9x18 inches and is listed for Porsche 993, 996.
The 5x130 bolt pattern of the BBS RS774 is the one used by Porsche and some Mercedes-Benz.
At ET52 the BBS RS774 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 225-275 mm are the usual match for a 9-inch rim.
Before fitting an 18-inch BBS RS774, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
No centre bore figure is recorded for the BBS RS774. Read the markings on the back of the wheel before relying on it.
More on where the BBS RS774 came from and how it is built is on the BBS RSII page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS774 | 5x130 | 18 | 9 | 52 | — | — | — | Porsche 993, 996 | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit