
BBS RSII series
BBS RS775
- Size7x17"
- PCD4x114.3
- OffsetET42
This page covers the BBS RS775, one wheel from the RS II family of two-piece mesh wheels. Size is 7J x 17.
On the BBS RS775, the 4x114.3 PCD is the one used by older Nissan and Mitsubishi.
ET42 is a high offset for the BBS RS775, so it tucks well inside the arch, as front-drive and most modern cars need. A 7-inch rim normally takes tyres from about 175 to 225 mm wide.
At 17 inches, the BBS RS775 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
No centre bore or fitment figure is recorded for the BBS RS775. Read the markings on the back of the wheel before relying on it.
More on where the BBS RS775 came from and how it is built is on the BBS RSII page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS775 | 4x114.3 | 17 | 7 | 42 | — | — | — | — | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit