BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS776

  • Size7x17"
  • PCD5x100
  • OffsetET48

This page covers the BBS RS776, one wheel from the RS II family of two-piece mesh wheels. Size is 7J x 17.

On the BBS RS776, the 5x100 PCD is the one used by VW Group, Subaru and Toyota.

ET48 is a high offset for the BBS RS776, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 175-225 mm are the usual match for a 7-inch rim.

At 17 inches, the BBS RS776 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

The centre bore and fitment of the BBS RS776 are not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

For the history behind the BBS RS776, how to spot a genuine wheel and what to check when buying used, see the BBS RSII series guide.

Specifications

BBS RS776 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS7765x10017748—————

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models