
BBS RSII series
BBS RS777
- Size7x17"
- PCD5x114.3
- OffsetET35
The BBS RS777 belongs to the RS II family of two-piece mesh wheels. It is a 17-inch wheel, 7 inches wide.
The 5x114.3 bolt pattern of the BBS RS777 is the one used by many Japanese and Korean cars.
ET35 is a high offset for the BBS RS777, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 175-225 mm are the usual match for a 7-inch rim.
At 17 inches, the BBS RS777 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
No centre bore or fitment figure is recorded for the BBS RS777. Read the markings on the back of the wheel before relying on it.
For the history behind the BBS RS777, how to spot a genuine wheel and what to check when buying used, see the BBS RSII series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS777 | 5x114.3 | 17 | 7 | 35 | — | — | — | — | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit