
BBS RSII series
BBS RS778
- Size7x17"
- PCD5x114.3
- OffsetET45
This page covers the BBS RS778, one wheel from the RS II range, which kept the mesh look of the RS on a two-piece construction. It is a 17-inch wheel, 7 inches wide.
The 5x114.3 bolt pattern of the BBS RS778 is the one used by many Japanese and Korean cars.
ET45 is a high offset for the BBS RS778, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 175-225 mm are the usual match for a 7-inch rim.
Before fitting a 17-inch BBS RS778, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
The centre bore and fitment of the BBS RS778 are not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.
The BBS RSII overview covers the background of the BBS RS778 and its siblings, their construction and buying tips.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS778 | 5x114.3 | 17 | 7 | 45 | — | — | — | — | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit