
BBS RSII series
BBS RS779
- Size8x17"
- PCD5x114.3
- OffsetET38
- Centre bore70 mm
BBS RS779 is a part number from the RS II, the two-piece successor to the original RS. It is a 17-inch wheel, 8 inches wide.
On the BBS RS779, the 5x114.3 PCD is the one used by many Japanese and Korean cars; the 70 mm centre bore decides whether you need hub-centric rings.
At ET38 the BBS RS779 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 205-245 mm are the usual match for an 8-inch rim.
At 17 inches, the BBS RS779 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
No fitment figure is recorded for the BBS RS779. Read the markings on the back of the wheel before relying on it.
More on where the BBS RS779 came from and how it is built is on the BBS RSII page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS779 | 5x114.3 | 17 | 8 | 38 | 70 | — | — | — | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit