
BBS RSII series
BBS RS780
- Size8x17"
- PCD5x114.3
- OffsetET45
The BBS RS780 belongs to the RS II range, which kept the mesh look of the RS on a two-piece construction. It measures 8x17 inches.
On the BBS RS780, the 5x114.3 PCD is the one used by many Japanese and Korean cars.
At ET45 the BBS RS780 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. An 8-inch rim normally takes tyres from about 205 to 245 mm wide.
Before fitting a 17-inch BBS RS780, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
The centre bore and fitment of the BBS RS780 are not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.
The BBS RSII overview covers the background of the BBS RS780 and its siblings, their construction and buying tips.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS780 | 5x114.3 | 17 | 8 | 45 | — | — | — | — | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit