BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS781

  • Size9x17"
  • PCD5x114.3
  • OffsetET38
  • Centre bore70 mm

BBS RS781 is a part number from the RS II range, which kept the mesh look of the RS on a two-piece construction. It measures 9x17 inches.

On the BBS RS781, the 5x114.3 PCD is the one used by many Japanese and Korean cars; the 70 mm centre bore decides whether you need hub-centric rings.

ET38 is a high offset for the BBS RS781, so it tucks well inside the arch, as front-drive and most modern cars need. A 9-inch rim normally takes tyres from about 225 to 275 mm wide.

At 17 inches, the BBS RS781 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

No fitment figure is recorded for the BBS RS781. Read the markings on the back of the wheel before relying on it.

More on where the BBS RS781 came from and how it is built is on the BBS RSII page.

Specifications

BBS RS781 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS7815x114.31793870————

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models