
BBS RSII series
BBS RS782
- Size9x17"
- PCD5x114.3
- OffsetET45
BBS RS782 is a part number from the RS II, the two-piece successor to the original RS. Size is 9J x 17.
On the BBS RS782, the 5x114.3 PCD is the one used by many Japanese and Korean cars.
At ET45 the BBS RS782 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 225-275 mm are the usual match for a 9-inch rim.
At 17 inches, the BBS RS782 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
No centre bore or fitment figure is recorded for the BBS RS782. Read the markings on the back of the wheel before relying on it.
For the history behind the BBS RS782, how to spot a genuine wheel and what to check when buying used, see the BBS RSII series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS782 | 5x114.3 | 17 | 9 | 45 | — | — | — | — | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit