BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS783

  • Size7.5x18"
  • PCD4x114.3
  • OffsetET45

The BBS RS783 belongs to the RS II family of two-piece mesh wheels. It is an 18-inch wheel, 7.5 inches wide.

On the BBS RS783, the 4x114.3 PCD is the one used by older Nissan and Mitsubishi.

ET45 is a high offset for the BBS RS783, so it tucks well inside the arch, as front-drive and most modern cars need. A 7.5-inch rim normally takes tyres from about 195 to 235 mm wide.

Before fitting an 18-inch BBS RS783, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

The centre bore and fitment of the BBS RS783 are not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

For the history behind the BBS RS783, how to spot a genuine wheel and what to check when buying used, see the BBS RSII series guide.

Specifications

BBS RS783 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS7834x114.3187.545—————

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models