BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS784

  • Size7.5x18"
  • PCD5x100
  • OffsetET48

BBS RS784 is a part number from the RS II, the two-piece successor to the original RS. Size is 7.5J x 18.

The 5x100 bolt pattern of the BBS RS784 is the one used by VW Group, Subaru and Toyota.

ET48 is a high offset for the BBS RS784, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 195-235 mm are the usual match for a 7.5-inch rim.

Before fitting an 18-inch BBS RS784, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

The centre bore and fitment of the BBS RS784 are not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

For the history behind the BBS RS784, how to spot a genuine wheel and what to check when buying used, see the BBS RSII series guide.

Specifications

BBS RS784 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS7845x100187.548—————

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models