BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS785

  • Size7.5x18"
  • PCD5x114.3
  • OffsetET45

The BBS RS785 belongs to the RS II range, which kept the mesh look of the RS on a two-piece construction. Size is 7.5J x 18.

The 5x114.3 bolt pattern of the BBS RS785 is the one used by many Japanese and Korean cars.

At ET45 the BBS RS785 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 195-235 mm are the usual match for a 7.5-inch rim.

At 18 inches, the BBS RS785 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

The centre bore and fitment of the BBS RS785 are not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

The BBS RSII overview covers the background of the BBS RS785 and its siblings, their construction and buying tips.

Specifications

BBS RS785 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS7855x114.3187.545—————

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models