
BBS RSII series
BBS RS786
- Size8x18"
- PCD5x114.3
- OffsetET35
This page covers the BBS RS786, one wheel from the RS II range, which kept the mesh look of the RS on a two-piece construction. It is an 18-inch wheel, 8 inches wide.
The 5x114.3 bolt pattern of the BBS RS786 is the one used by many Japanese and Korean cars.
ET35 is a high offset for the BBS RS786, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 205-245 mm are the usual match for an 8-inch rim.
At 18 inches, the BBS RS786 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
The centre bore and fitment of the BBS RS786 are not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.
For the history behind the BBS RS786, how to spot a genuine wheel and what to check when buying used, see the BBS RSII series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS786 | 5x114.3 | 18 | 8 | 35 | — | — | — | — | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit