BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS788

  • Size9x18"
  • PCD5x114.3
  • OffsetET35

This page covers the BBS RS788, one wheel from the RS II family of two-piece mesh wheels. It is an 18-inch wheel, 9 inches wide.

The 5x114.3 bolt pattern of the BBS RS788 is the one used by many Japanese and Korean cars.

ET35 is a high offset for the BBS RS788, so it tucks well inside the arch, as front-drive and most modern cars need. A 9-inch rim normally takes tyres from about 225 to 275 mm wide.

Before fitting an 18-inch BBS RS788, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

No centre bore or fitment figure is recorded for the BBS RS788. Read the markings on the back of the wheel before relying on it.

For the history behind the BBS RS788, how to spot a genuine wheel and what to check when buying used, see the BBS RSII series guide.

Specifications

BBS RS788 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS7885x114.318935—————

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models