BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS789

  • Size9x18"
  • PCD5x114.3
  • OffsetET45

BBS RS789 is a part number from the RS II, the two-piece successor to the original RS. Size is 9J x 18.

The 5x114.3 bolt pattern of the BBS RS789 is the one used by many Japanese and Korean cars.

At ET45 the BBS RS789 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 225-275 mm are the usual match for a 9-inch rim.

At 18 inches, the BBS RS789 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

The centre bore and fitment of the BBS RS789 are not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

More on where the BBS RS789 came from and how it is built is on the BBS RSII page.

Specifications

BBS RS789 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS7895x114.318945—————

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models