BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS790

  • Size9.5x18"
  • PCD5x114.3
  • OffsetET20

The BBS RS790 belongs to the RS II, the two-piece successor to the original RS. It measures 9.5x18 inches.

The 5x114.3 bolt pattern of the BBS RS790 is the one used by many Japanese and Korean cars.

An offset of ET20 puts the BBS RS790 in the usual range for European saloons of its era. Tyre widths of roughly 245-285 mm are the usual match for a 9.5-inch rim.

Before fitting an 18-inch BBS RS790, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

No centre bore or fitment figure is recorded for the BBS RS790. Read the markings on the back of the wheel before relying on it.

More on where the BBS RS790 came from and how it is built is on the BBS RSII page.

Specifications

BBS RS790 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS7905x114.3189.520—————

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models