BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS793

  • Size9x18"
  • PCD5x120
  • OffsetET47
  • Centre bore72.4 mm

The BBS RS793 belongs to the RS II range, which kept the mesh look of the RS on a two-piece construction. It measures 9x18 inches and is listed for Land Rover.

The 5x120 bolt pattern of the BBS RS793 is the one used by BMW and some Land Rover and Honda; the 72.4 mm centre bore decides whether you need hub-centric rings.

At ET47 the BBS RS793 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 225-275 mm are the usual match for a 9-inch rim.

At 18 inches, the BBS RS793 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

More on where the BBS RS793 came from and how it is built is on the BBS RSII page.

Specifications

BBS RS793 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS7935x1201894772.4——Land Rover—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models