BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS794

  • Size7x16"
  • PCD5x100
  • OffsetET38
  • Centre bore57 mm

The BBS RS794 belongs to the RS II, the two-piece successor to the original RS. It measures 7x16 inches and is listed for VW.

On the BBS RS794, the 5x100 PCD is the one used by VW Group, Subaru and Toyota; the 57 mm centre bore decides whether you need hub-centric rings.

At ET38 the BBS RS794 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. A 7-inch rim normally takes tyres from about 175 to 225 mm wide.

Before fitting a 16-inch BBS RS794, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

The BBS RSII overview covers the background of the BBS RS794 and its siblings, their construction and buying tips.

Specifications

BBS RS794 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS7945x1001673857——VW—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models