
BBS RSII series
BBS RS796
- Size6x15"
- PCD5x100
- OffsetET38
- Centre bore57 mm
This page covers the BBS RS796, one wheel from the RS II, the two-piece successor to the original RS. Size is 6J x 15 and is listed for VW.
The 5x100 bolt pattern of the BBS RS796 is the one used by VW Group, Subaru and Toyota; the 57 mm centre bore decides whether you need hub-centric rings.
ET38 is a high offset for the BBS RS796, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 155-195 mm are the usual match for a 6-inch rim.
Before fitting a 15-inch BBS RS796, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
More on where the BBS RS796 came from and how it is built is on the BBS RSII page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS796 | 5x100 | 15 | 6 | 38 | 57 | — | — | VW | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit