BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS797

  • Size7.5x17"
  • PCD5x108
  • OffsetET43

The BBS RS797 belongs to the RS II, the two-piece successor to the original RS. It measures 7.5x17 inches and is listed for Volvo.

The 5x108 bolt pattern of the BBS RS797 is the one used by Ford, Volvo, Jaguar and Peugeot.

ET43 is a high offset for the BBS RS797, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 195-235 mm are the usual match for a 7.5-inch rim.

At 17 inches, the BBS RS797 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

The centre bore of the BBS RS797 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

For the history behind the BBS RS797, how to spot a genuine wheel and what to check when buying used, see the BBS RSII series guide.

Specifications

BBS RS797 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS7975x108177.543———Volvo—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models