BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS798

  • Size9x19"
  • PCD5x120
  • OffsetET48
  • Centre bore72.5 mm

BBS RS798 is a part number from the RS II, the two-piece successor to the original RS. It is a 19-inch wheel, 9 inches wide and is listed for BMW x5 e53.

On the BBS RS798, the 5x120 PCD is the one used by BMW and some Land Rover and Honda; the 72.5 mm centre bore matches BMW hubs.

At ET48 the BBS RS798 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 225-275 mm are the usual match for a 9-inch rim.

At 19 inches, the BBS RS798 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

Note on record: 75 style bmw.

More on where the BBS RS798 came from and how it is built is on the BBS RSII page.

Specifications

BBS RS798 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS7985x1201994872.5——BMW x5 e5375 style bmw

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models