
BBS RSII series
BBS RS800
- Size7.5x17"
- PCD5x112
- OffsetET45
- Centre bore57 mm
This page covers the BBS RS800, one wheel from the RS II, the two-piece successor to the original RS. It is a 17-inch wheel, 7.5 inches wide and is listed for VW passat W8.
The 5x112 bolt pattern of the BBS RS800 is the one used by Audi, VW, Mercedes-Benz and later BMW; the 57 mm centre bore decides whether you need hub-centric rings.
ET45 is a high offset for the BBS RS800, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 195-235 mm are the usual match for a 7.5-inch rim.
Before fitting a 17-inch BBS RS800, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
Note on record: Madras.
More on where the BBS RS800 came from and how it is built is on the BBS RSII page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS800 | 5x112 | 17 | 7.5 | 45 | 57 | — | — | VW passat W8 | Madras |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit