BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS801

  • Size8x18"
  • PCD5x120
  • OffsetET47
  • Centre bore72.5 mm

The BBS RS801 belongs to the RS II, the two-piece successor to the original RS. Size is 8J x 18 and is listed for BMW e46, z4 e85.

On the BBS RS801, the 5x120 PCD is the one used by BMW and some Land Rover and Honda; the 72.5 mm centre bore matches BMW hubs.

ET47 is a high offset for the BBS RS801, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 205-245 mm are the usual match for an 8-inch rim.

At 18 inches, the BBS RS801 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

Note on record: 78 style bmw.

More on where the BBS RS801 came from and how it is built is on the BBS RSII page.

Specifications

BBS RS801 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS8015x1201884772.5——BMW e46, z4 e8578 style bmw

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models