BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS805

  • Size8.5x19"
  • PCD5x114.3
  • OffsetET38

The BBS RS805 belongs to the RS II, the two-piece successor to the original RS. It measures 8.5x19 inches.

On the BBS RS805, the 5x114.3 PCD is the one used by many Japanese and Korean cars.

At ET38 the BBS RS805 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 215-265 mm are the usual match for an 8.5-inch rim.

Before fitting a 19-inch BBS RS805, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

Note on record: hinodex.

No centre bore or fitment figure is recorded for the BBS RS805. Read the markings on the back of the wheel before relying on it.

The BBS RSII overview covers the background of the BBS RS805 and its siblings, their construction and buying tips.

Specifications

BBS RS805 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS8055x114.3198.538————hinodex

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models