BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS806

  • Size9.5x19"
  • PCD5x114.3
  • OffsetET38

BBS RS806 is a part number from the RS II, the two-piece successor to the original RS. Size is 9.5J x 19.

On the BBS RS806, the 5x114.3 PCD is the one used by many Japanese and Korean cars.

At ET38 the BBS RS806 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. A 9.5-inch rim normally takes tyres from about 245 to 285 mm wide.

At 19 inches, the BBS RS806 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

Note on record: hinodex.

No centre bore or fitment figure is recorded for the BBS RS806. Read the markings on the back of the wheel before relying on it.

More on where the BBS RS806 came from and how it is built is on the BBS RSII page.

Specifications

BBS RS806 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS8065x114.3199.538————hinodex

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models