BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS809

  • Size8x18"
  • PCD5x114.3
  • OffsetET35

This page covers the BBS RS809, one wheel from the RS II range, which kept the mesh look of the RS on a two-piece construction. It is an 18-inch wheel, 8 inches wide.

The 5x114.3 bolt pattern of the BBS RS809 is the one used by many Japanese and Korean cars.

At ET35 the BBS RS809 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. An 8-inch rim normally takes tyres from about 205 to 245 mm wide.

At 18 inches, the BBS RS809 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

Note on record: hinodex.

No centre bore or fitment figure is recorded for the BBS RS809. Read the markings on the back of the wheel before relying on it.

More on where the BBS RS809 came from and how it is built is on the BBS RSII page.

Specifications

BBS RS809 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS8095x114.318835————hinodex

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models