BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS815

  • Size7.5x17"
  • PCD5x114.3
  • OffsetET35

BBS RS815 is a part number from the RS II range, which kept the mesh look of the RS on a two-piece construction. It measures 7.5x17 inches.

The 5x114.3 bolt pattern of the BBS RS815 is the one used by many Japanese and Korean cars.

At ET35 the BBS RS815 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. A 7.5-inch rim normally takes tyres from about 195 to 235 mm wide.

At 17 inches, the BBS RS815 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

The centre bore and fitment of the BBS RS815 are not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

The BBS RSII overview covers the background of the BBS RS815 and its siblings, their construction and buying tips.

Specifications

BBS RS815 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS8155x114.3177.535—————

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models