BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS814

  • Size6.5x15"
  • PCD4x100
  • OffsetET43
  • Centre bore57 mm

The BBS RS814 belongs to the RS II, the two-piece successor to the original RS. It measures 6.5x15 inches and is listed for VW lupo GTI.

The 4x100 bolt pattern of the BBS RS814 is the one used by older BMW, VW, Honda and Mazda; the 57 mm centre bore decides whether you need hub-centric rings.

ET43 is a high offset for the BBS RS814, so it tucks well inside the arch, as front-drive and most modern cars need. A 6.5-inch rim normally takes tyres from about 165 to 215 mm wide.

Before fitting a 15-inch BBS RS814, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

More on where the BBS RS814 came from and how it is built is on the BBS RSII page.

Specifications

BBS RS814 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS8144x100156.54357——VW lupo GTI—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models