
BBS RSII series
BBS RS813
- Size9.5x18"
- PCD5x114.3
- OffsetET14
This page covers the BBS RS813, one wheel from the RS II family of two-piece mesh wheels. Size is 9.5J x 18.
The 5x114.3 bolt pattern of the BBS RS813 is the one used by many Japanese and Korean cars.
The BBS RS813 has a low ET14 offset, so the face sits well outboard; that is typical of older rear-drive cars and of wheels meant to fill the arches. Tyre widths of roughly 245-285 mm are the usual match for a 9.5-inch rim.
Before fitting an 18-inch BBS RS813, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
Note on record: hinodex.
No centre bore or fitment figure is recorded for the BBS RS813. Read the markings on the back of the wheel before relying on it.
For the history behind the BBS RS813, how to spot a genuine wheel and what to check when buying used, see the BBS RSII series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS813 | 5x114.3 | 18 | 9.5 | 14 | — | — | — | — | hinodex |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit