BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS812

  • Size9x18"
  • PCD5x114.3
  • OffsetET40

BBS RS812 is a part number from the RS II family of two-piece mesh wheels. It is an 18-inch wheel, 9 inches wide.

On the BBS RS812, the 5x114.3 PCD is the one used by many Japanese and Korean cars.

ET40 is a high offset for the BBS RS812, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 225-275 mm are the usual match for a 9-inch rim.

At 18 inches, the BBS RS812 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

Note on record: hinodex.

The centre bore and fitment of the BBS RS812 are not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

For the history behind the BBS RS812, how to spot a genuine wheel and what to check when buying used, see the BBS RSII series guide.

Specifications

BBS RS812 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS8125x114.318940————hinodex

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models