BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS811

  • Size9x18"
  • PCD5x114.3
  • OffsetET35

BBS RS811 is a part number from the RS II range, which kept the mesh look of the RS on a two-piece construction. It is an 18-inch wheel, 9 inches wide.

On the BBS RS811, the 5x114.3 PCD is the one used by many Japanese and Korean cars.

ET35 is a high offset for the BBS RS811, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 225-275 mm are the usual match for a 9-inch rim.

At 18 inches, the BBS RS811 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

Note on record: hinodex.

The centre bore and fitment of the BBS RS811 are not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

The BBS RSII overview covers the background of the BBS RS811 and its siblings, their construction and buying tips.

Specifications

BBS RS811 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS8115x114.318935————hinodex

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models