
BBS RSII series
BBS RS822
- Size8x18"
- PCD5x108
- OffsetET49
This page covers the BBS RS822, one wheel from the RS II, the two-piece successor to the original RS. Size is 8J x 18 and is listed for Volvo.
The 5x108 bolt pattern of the BBS RS822 is the one used by Ford, Volvo, Jaguar and Peugeot.
At ET49 the BBS RS822 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 205-245 mm are the usual match for an 8-inch rim.
At 18 inches, the BBS RS822 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
No centre bore figure is recorded for the BBS RS822. Read the markings on the back of the wheel before relying on it.
The BBS RSII overview covers the background of the BBS RS822 and its siblings, their construction and buying tips.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS822 | 5x108 | 18 | 8 | 49 | — | — | — | Volvo | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit