BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS823

  • Size7.5x18"
  • PCD5x100
  • OffsetET45

BBS RS823 is a part number from the RS II, the two-piece successor to the original RS. It measures 7.5x18 inches.

The 5x100 bolt pattern of the BBS RS823 is the one used by VW Group, Subaru and Toyota.

At ET45 the BBS RS823 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 195-235 mm are the usual match for a 7.5-inch rim.

Before fitting an 18-inch BBS RS823, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

Note on record: hinodex.

No centre bore or fitment figure is recorded for the BBS RS823. Read the markings on the back of the wheel before relying on it.

More on where the BBS RS823 came from and how it is built is on the BBS RSII page.

Specifications

BBS RS823 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS8235x100187.545————hinodex

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models