BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS824

  • Size7.5x18"
  • PCD5x114.3
  • OffsetET45

The BBS RS824 belongs to the RS II, the two-piece successor to the original RS. It measures 7.5x18 inches.

On the BBS RS824, the 5x114.3 PCD is the one used by many Japanese and Korean cars.

ET45 is a high offset for the BBS RS824, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 195-235 mm are the usual match for a 7.5-inch rim.

Before fitting an 18-inch BBS RS824, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

Note on record: hinodex.

No centre bore or fitment figure is recorded for the BBS RS824. Read the markings on the back of the wheel before relying on it.

For the history behind the BBS RS824, how to spot a genuine wheel and what to check when buying used, see the BBS RSII series guide.

Specifications

BBS RS824 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS8245x114.3187.545————hinodex

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models