BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS825

  • Size6.5x16"
  • PCD5x100
  • OffsetET43
  • Centre bore57 mm

The BBS RS825 belongs to the RS II family of two-piece mesh wheels. It measures 6.5x16 inches and is listed for vag.

The 5x100 bolt pattern of the BBS RS825 is the one used by VW Group, Subaru and Toyota; the 57 mm centre bore decides whether you need hub-centric rings.

ET43 is a high offset for the BBS RS825, so it tucks well inside the arch, as front-drive and most modern cars need. A 6.5-inch rim normally takes tyres from about 165 to 215 mm wide.

At 16 inches, the BBS RS825 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

For the history behind the BBS RS825, how to spot a genuine wheel and what to check when buying used, see the BBS RSII series guide.

Specifications

BBS RS825 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS8255x100166.54357——vag—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models