
BBS RSII series
BBS RS826
- Size8x17"
- PCD5x100
- OffsetET35
- Centre bore57 mm
BBS RS826 is a part number from the RS II, the two-piece successor to the original RS. Size is 8J x 17 and is listed for vag.
The 5x100 bolt pattern of the BBS RS826 is the one used by VW Group, Subaru and Toyota; the 57 mm centre bore decides whether you need hub-centric rings.
ET35 is a high offset for the BBS RS826, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 205-245 mm are the usual match for an 8-inch rim.
At 17 inches, the BBS RS826 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
Note on record: RSM.
The BBS RSII overview covers the background of the BBS RS826 and its siblings, their construction and buying tips.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS826 | 5x100 | 17 | 8 | 35 | 57 | — | — | vag | RSM |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit