
BBS RSII series
BBS RS827
- Size9x17"
- PCD5x100
- OffsetET32
- Centre bore57 mm
The BBS RS827 belongs to the RS II, the two-piece successor to the original RS. It measures 9x17 inches and is listed for vag.
The 5x100 bolt pattern of the BBS RS827 is the one used by VW Group, Subaru and Toyota; the 57 mm centre bore decides whether you need hub-centric rings.
An offset of ET32 puts the BBS RS827 in the usual range for European saloons of its era. Tyre widths of roughly 225-275 mm are the usual match for a 9-inch rim.
At 17 inches, the BBS RS827 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
Note on record: RSM.
For the history behind the BBS RS827, how to spot a genuine wheel and what to check when buying used, see the BBS RSII series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS827 | 5x100 | 17 | 9 | 32 | 57 | — | — | vag | RSM |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit