BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS828

  • Size8x17"
  • PCD5x112
  • OffsetET32

BBS RS828 is a part number from the RS II range, which kept the mesh look of the RS on a two-piece construction. It measures 8x17 inches and is listed for MB AMG/C/E/S, VAG.

On the BBS RS828, the 5x112 PCD is the one used by Audi, VW, Mercedes-Benz and later BMW.

An offset of ET32 puts the BBS RS828 in the usual range for European saloons of its era. An 8-inch rim normally takes tyres from about 205 to 245 mm wide.

Before fitting a 17-inch BBS RS828, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

Note on record: RSM.

No centre bore figure is recorded for the BBS RS828. Read the markings on the back of the wheel before relying on it.

For the history behind the BBS RS828, how to spot a genuine wheel and what to check when buying used, see the BBS RSII series guide.

Specifications

BBS RS828 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS8285x11217832———MB AMG/C/E/S, VAGRSM

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models