
BBS RSII series
BBS RS829
- Size9x17"
- PCD5x112
- OffsetET32
This page covers the BBS RS829, one wheel from the RS II, the two-piece successor to the original RS. It measures 9x17 inches and is listed for MB AMG/C/E/S, VAG.
The 5x112 bolt pattern of the BBS RS829 is the one used by Audi, VW, Mercedes-Benz and later BMW.
The BBS RS829 uses ET32, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. Tyre widths of roughly 225-275 mm are the usual match for a 9-inch rim.
Before fitting a 17-inch BBS RS829, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
Note on record: RSM.
The centre bore of the BBS RS829 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.
More on where the BBS RS829 came from and how it is built is on the BBS RSII page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS829 | 5x112 | 17 | 9 | 32 | — | — | — | MB AMG/C/E/S, VAG | RSM |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit